MAGRES redundant EAM580R-SY - CANopen® | Absolute encoders

Encoder single- or multiturn / CANopen® redundant
Redundant sensing with galvanical separation
Resolution max. 32 bit (14 bit ST, 18 bit MT)
E1 approval (KBA)
High protection IP 67
High resistance to shock and vibrations
Protection against corrosion CX (C5-M)
Wire cross section 0.5 mm²
Applicable up to PLd (ISO 13849)

available on request

Technical data

show all

Technical data - electrical ratings

Voltage supply

10...30 VDC

Consumption typ.

35 mA (24 VDC, w/o load)

Initializing time

≤ 1 s after power on

Interface

CANopen®

Function

Multiturn
Singleturn

Profile conformity

CANopen® CiA
Communication profile DS 301
LSS profile DSP 305
Device profile DS 406

Steps per revolution

≤16384 / 14 bit

Number of revolutions

≤262144 / 18 bit

Absolute accuracy

±0.15 ° (+20 ±15 °C)
±0.25 ° (-40...+85 °C)

Sensing method

Magnetic

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Output stages

CAN-Bus, LV (5 V) compatible ISO 11898

Interference immunity

EN 61000-6-2
UN ECE R10

Emitted interference

EN 61000-6-4
UN ECE R10

MTTF_d (ISO 13849)

High (>100 years) per channel
Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).

Approval

UL approval / E217823
E1 approval (KBA)

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Flange

Synchro flange

Protection EN 60529

IP 67 (with shaft seal)

Operating speed

≤6000 rpm

Starting torque

≤2.5 Ncm (+20 °C, IP 67)

Moment of inertia

15.38 gcm²

Admitted shaft load

≤40 N axial
≤80 N radial

Material

Housing: steel, powder-coated
Flange: aluminium
Shaft: stainless steel

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Operating temperature

-40...+85 °C (see general information)

Relative humidity

95 %

Resistance

EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 500 g, 1 ms

Weight approx.

250 g

Connection

Flange connector M12, 5-pin
Cable 2 m

Software

show all

Software

EAMxxx describing file EDS / CANopen
- (zip | 8 KB)
Baumer Sensor Suite
- (zip | 163 MB)

Downloads

show all

Data sheet

Data sheet – EAM580R-SY - CANopen®
- ZH (pdf | 995 KB)
Data sheet – EAM580R-SY - CANopen®
- DE (pdf | 883 KB)
Data sheet – EAM580R-SY - CANopen®
- EN (pdf | 863 KB)
Data sheet – EAM580R-SY - CANopen®
- FR (pdf | 865 KB)

Quickstart

EAM580R redundant - CANopen®
- DE/EN/FR/IT/ES/RU (pdf | 928 KB)

Software Manual

EAM360, EAM580 - CANopen
- EN (pdf | 1 MB)

Certificates / approvals

RoC / E1 approval - EAM580R
- DE/EN (pdf | 129 KB)

Brochures / Catalogs

Brochure – Magnetic absolute encoders EAM580 / EAM360
- DE (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- EN (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- FR (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- IT (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ES (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ZH (pdf | 1 MB)

Declaration of conformity

DoC / CoC - EAM580 / EAM580R
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 281 KB)

CAD

EAM580R: Solid shaft ø6 mm, cable radial, synchro flange, IP67
- (zip | 150 KB)
EAM580R: Solid shaft ø6 mm, M12 radial, synchro flange, IP67
- (zip | 142 KB)

Accessories

show all

Mounting accessories

	Clamp set ø15 mm Article no.: 10252773	Set consists of three eccentric fixing
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Article no.: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Article no.: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Article no.: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Article no.: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Mounting adaptor For encoders with synchro flange Article no.: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Article no.: 10117668	With 3x eccentric fixings, screws and nuts

Connectors and cables

	Female connector M12, 5-pin, straight, shielded, 2 m cable Article no.: 11046264	Female connector M12, 5-pin, straight
	Female connector M12, 5-pin, straight, shielded, 5 m cable Article no.: 11046266	Female connector M12, 5-pin, straight

Measuring wheels

	MR241.06D Small measuring wheel Article no.: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel Article no.: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm

To the top

Absolute encoders

MAGRES redundant EAM580R-SY - CANopen®

Solid shaft with synchro flange

Technical data

Technical data - electrical ratings

Technical data - mechanical design

Software

Software

Downloads

Data sheet

Quickstart

Software Manual

Certificates / approvals

Brochures / Catalogs

Declaration of conformity

CAD

Accessories

Mounting accessories

Connectors and cables

Measuring wheels