optoPulse EN580E.IL-SU06.GB1T2.01024.K

Article no.: 11246010

Size ø58 mm
Precise optical sensing
Output signal level TTL
Pulses per revolution 1024
Connection: flange connector M23, 12-pin, CCW

available on request

Technical data

show all

Technical data - electrical ratings

Voltage supply

5 VDC ±5 %

Reverse polarity protection

Short-circuit proof

Yes (max. 1 s and 1 signal)

Consumption w/o load

≤70 mA

Pulses per revolution

1024

Phase shift

90 ° ±10°

Duty cycle

40…60 %

Reference signal

Zero pulse, width 90° ±10 %

Sensing method

Optical

Output frequency

≤300 kHz (TTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-4

Approval

UL-Listing: E217823

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Synchro flange

Protection EN 60529

IP 54 (flange side)
IP 65 (housing side)

Operating speed

≤6000 rpm (+25 °C)

Starting torque

≤0.02 Nm

Material

Housing: aluminium
Solid shaft: stainless steel

Operating temperature

-25...+100 °C (see general information)

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6 Vibration 30 g, 10-2000 Hz
EN 60068-2-27 Shock 100 g, 11 ms

Connection

Flange connector M23, 12-pin, CCW

Weight approx.

300 g

Downloads

show all

Data sheet

Data sheet – EN580E.IL-SU06.GB1T2.01024.K
- FR (pdf | 911 KB)
Data sheet – EN580E.IL-SU06.GB1T2.01024.K
- DE (pdf | 914 KB)
Data sheet – EN580E.IL-SU06.GB1T2.01024.K
- EN (pdf | 911 KB)

Quickstart

EN580E.IL
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.IL - solid shaft with synchro flange, flange connector M23
- (zip | 386 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Accessories

show all

Mounting accessories

	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Article no.: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Article no.: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Article no.: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Article no.: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Set of eccentric fixings type A Article no.: 11065545	With 3 eccentric fixings type A
	Mounting adaptor For encoders with synchro flange Article no.: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Article no.: 10117668	With 3x eccentric fixings, screws and nuts

Cables with open-ended wires

	Female connector M23, 12-pin, CW, with cable 1 m Article no.: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Article no.: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Article no.: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Article no.: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Connector M23 (S2BG12), 1 m cable (incremental) Article no.: 11072792	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 2 m cable (incremental) Article no.: 11072796	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 5 m cable (incremental) Article no.: 11072804	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 10 m cable (incremental) Article no.: 11072815	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs

Measuring wheels

	MR241.06D Small measuring wheel Article no.: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel Article no.: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm

To the top

Incremental encoders

optoPulse EN580E.IL-SU06.GB1T2.01024.K

Solid shaft with synchro flange, 1024 pulses per revolution

Technical data

Technical data - electrical ratings

Technical data - mechanical design

Downloads

Data sheet

Quickstart

Certificates / approvals

CAD

EPLAN

Accessories

Mounting accessories

Cables with open-ended wires

Measuring wheels